Features:

l         Stainless steel (SUS304/316L) material, higher hardness and better stress durability

l         Adjustable air outlet width (0.1mm min with 0.1mm precise); total length can reach 2.4m (3m max. for customized order.)

l         Various air outlet direction(Straight/forward/backward blowing) and adjustable outlet angle (straight blowing,53°,127°,200°adjustable)

l         Constituted by air inlet, shunt board, tapering ventilation area and narrow air channel, have advantage in small air resistance and even air flow.

l         General pressure durability: 5kgf/cm2; Utmost air speed: 400m/s(400m/s available by using air compressor)

l         Highest temperature: 250℃, can connect with heater to blowing hot wind .

l         Various air inlet dia. For different air volume demand. Have three inlet mode (front/rear/top inlet mode) and easy to assembly.

l        Besides drying, it can also applied to separate the wind and reduce cold/hot air lose.   

l         After reinforce treatment, air knife can be turned into water knife(unable to adjust the air outlet)

l         Few losses in pressure, less energy consumption (60% approx.) and more economic compared with standard air knife.

l         Can add shunt regulating board and make the air flow more even, applicable to match more fan types.